Oilfield Transport & Hauling Services

Page Summary
  • Orich provides frac sand, wet frac sand, heavy transport, and equipment moves Alberta-wide.
  • Fully staffed crews with backup capacity, GPS tracking, and honest billing for every job.
  • Available 24/7 across Alberta with COR Certified, ISN Registered compliance documentation ready.

When a hauling contractor over-commits and doesn't show up, your operation slows down. Crews sit idle, completion timelines slip, and the cost of one unreliable contractor ripples across the entire job. Orich Transport provides reliable transport and bulk material hauling for energy, construction, and industrial operations across Alberta. Since 2007, producers have relied on Orich to move critical loads safely and on schedule.

Every job is planned before it starts, with documented crew headcounts, confirmed equipment assignments, and built-in redundancy so equipment issues never become your problem. We make your project as smooth as possible with our GPS-tracked fleet that runs 24/7 and our operators who are experienced in active oilfield and industrial environments.

Transportation & Hauling Services

Frac-sand hauling is one of the highest-stakes logistics jobs on an active well program. Orich supports active frac programs with bulk hopper-bottom hauling built around the timing and turnaround demands of continuous operations. We coordinate crew scheduling with backup capacity, load sequencing, and delivery windows to keep pace with your program. 

We haul dry frac sand for oilfield operations across Alberta, supporting producers and completions teams who need a hauling contractor that treats sand delivery with the same urgency they do.

Wet frac sand hauling requires equipment and operators that most hauling contractors aren't set up for. Sand pulled from water-based sources carries significantly more weight than dry sand due to its moisture content, requiring trailers with the right capacity, load management, and operational know-how to handle the added complexity safely.

Orich's fleet includes equipment purpose-built for wet frac sand hauling. We support producers who need a contractor who understands load requirements, Alberta weight regulations, and the coordination it takes to keep a wet sand program running without interruption.

Moving drilling, completions, and production equipment across active wellsites requires operators who understand oilfield site protocols, equipment handling procedures, and the consequences of a poorly planned move within a tight program timeline.

Orich provides oilfield equipment transport using flatdeck and specialized trailers with winch-equipped units for safe loading and unloading, including at sites with restricted access, soft ground, or limited staging space. Our operators are experienced on active oilfield sites and work within your program's scheduling requirements to minimize downtime and get your equipment where it needs to be.

Oversized and heavy loads require a different level of planning and operator experience. Weight distribution, route assessment, permit requirements, and load control all have to be managed.

Orich handles heavy hauling and specialized transport for oversized equipment across Alberta, including loads requiring controlled handling, multi-point securement, and experienced operators familiar with complex or non-standard configurations. We work through the pre-haul requirements to ensure your load moves safely and on schedule.

Not every piece of equipment can self-load, and attempting to force it onto a trailer under the wrong conditions poses a risk to the equipment and the operator. Orich operates recovery deck and winch-equipped trailers for equipment that requires assisted loading and unloading, including machinery in off-road, rural, or soft-ground locations where conventional loading isn't practical.

Our winch-on / winch-off capability is available as a standalone service or as part of a broader equipment transport requirement. If your site has access challenges or your equipment can't self-load, our team will assess the setup and execute the move safely.

When equipment needs to be repositioned between yards, sites, or project locations, delays cost real money. Orich provides equipment transport for excavators, skid steers, backhoes, compactors, and other construction and industrial machinery across Alberta.

We are ready to work with you when you need a hauling partner that shows up on time, communicates clearly, and handles the move without adding coordination problems to an already busy job.

Orich provides bulk and loose material transport for oilfield, construction, and industrial applications using hopper-bottom and dump trailers. From aggregate and fill to oilfield materials and site supplies, we match the right equipment to the material and haul it safely to your project location. We arrive on schedule and without the coordination gaps that slow down active job sites.

Our bulk hauling services are available for single loads, scheduled programs, and ongoing project support. If your project has consistent material movement requirements, contact our team to discuss volume capacity and scheduling options.

Active projects don't always follow a predictable schedule, so your hauling contractor needs to be able to respond when requirements change. Orich provides on-demand and scheduled site support hauling for ongoing projects, including staged moves, short-notice requests, and coordination with site supervisors and project managers.

We adapt to project timelines, proactively provide project updates, and handle logistics without creating more work for the team on site. If your project requires consistent, flexible hauling support, Orich is set up to be a long-term partner.

How Orich Approaches Every Haul

Planned

Before any truck rolls, the job is planned with crew headcounts confirmed, equipment assigned, load requirements reviewed, and scheduling coordinated with your site timeline. We document what's going on the job and track it, so nothing gets missed, and nothing surprises you.

Reliable

Orich builds redundancy into our hauling operations. That means backup driver and equipment capacity are planned so your project is not stalled. Our fleet is GPS-tracked with forward-facing cameras on every unit, and we maintain active WCB coverage and certification on all equipment

Jobsite Ready

Our operators are experienced on active oilfield, construction, and industrial sites. They understand site protocols, safety expectations, and how to work efficiently around other operations without creating risk.

Built for Alberta

Alberta's conditions with their remote access roads, seasonal weight restrictions, variable terrain, and demanding weather are what our fleet and processes are built around. We've been operating across the province since 2007. The conditions are a variable we account for from the start of every haul.

Transport & Hauling Frequently Asked Questions

Orich Transport provides oilfield trucking, dry and wet frac-sand hauling, heavy equipment transport, winch-on/winch-off services, bulk material hauling, construction and industrial equipment moves, and site support logistics across Alberta. 
 

Frac-sand hauling is a core part of Orich's operations. We support active frac programs with bulk hopper-bottom hauling coordinated around tight completion timelines. Wet frac sand hauling is also available for producers working with water-based sand sources. Our fleet includes equipment built to meet the load requirements of wet sand.

Wet frac sand hauling involves transporting sand with higher moisture content, typically sourced from water-based mining operations. Wet sand is heavier than dry sand, which creates specific load management and equipment requirements that not all hauling contractors are set up to handle. Orich provides wet frac sand hauling with equipment purpose-built for these loads, operated by experienced crews. If your program involves wet frac sand, contact our team to discuss requirements and scheduling.

Orich hauls a wide range of oilfield, construction, and industrial equipment and materials, including drilling and completions equipment, production infrastructure, excavators, skid steers, backhoes, oversized and heavy loads, frac sand (dry and wet), aggregate, bulk materials, and general site supplies. Our fleet includes flatdecks, hopper bottoms, dump trailers, and winch-equipped units to match the right equipment to the load. For complex or non-standard requirements, contact our team to review the specifics.

Orich provides heavy hauling for oversized and complex loads requiring controlled handling, multi-point securement, and experienced operators. We also operate winch-on / winch-off equipped trailers for equipment requiring assisted loading, including machinery at remote, off-road, or soft-ground locations where conventional loading isn't possible. Both services are available across Alberta.

Yes. We provide transport and hauling services for construction and industrial projects across Alberta, not just oilfield operations. We haul construction equipment, bulk materials, industrial machinery, and site supplies for a variety of project types. If you have a hauling requirement outside the energy sector, contact our team.

Safety is just as important to us as it is to you. Orich plans safety into every job we take on. Our fleet is GPS-tracked with forward-facing cameras on every unit. All equipment is regularly inspected and certified, operators carry active WCB coverage, and Orich is COR, ComplyWorks, and ISN certified. We also build backup capacity into our operations, so a driver or equipment issue doesn't become a safety or scheduling problem for your site.

Orich regularly supports short-notice, time-sensitive hauls as well as ongoing programs that require consistent, dependable transportation over days, weeks, or months. For continuous frac programs, active construction sites, or industrial projects with recurring hauling needs, we work with your team to build a scheduling and logistics plan that keeps your operation moving without disruption. Long-term partnerships are how we prefer to work. Contact us to discuss your program requirements.

Orich operates across Alberta, supporting oilfield, construction, and industrial projects throughout the province, including the Fox Creek and Grande Prairie regions, Northern Alberta, Central Alberta, and remote or rural locations other contractors won't reach. Our fleet is available 24/7, and we are willing to work away for the right program. If your project is in Alberta, contact our team to discuss our service availability.

To put together an accurate quote, it helps to know the load type and dimensions, pick-up and delivery locations, required timing or scheduling windows, site access conditions, and any special handling requirements. The more detail you can provide, the more accurate our quoting and scheduling will be. You can request a quote by calling us directly at 403-588-8699.

Ready to Talk About Your Hauling Job?

Whether you're planning a frac program, moving equipment, or need a reliable contractor for ongoing hauling support across Alberta — Orich is ready to hear what you need and put the right plan together.

Call us directly at 403.588.8699. You can also reach us by email at info(at)orich.ca or submit a request through our website and we'll get back to you quickly.